LXT 18v MULTI-TOOL

Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.

Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.

Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.

Battery Voltage
The voltage of a battery gives power to the machine. An 18V tool is more powerful than a 14.4V or a 7.2V.
Note: this only applies to machines in the same series.

Amperage
The easiest way to describe the amperage of a battery is to relate it to the size of the petrol tank in your car. A 3.0Ah battery has a bigger tank and can therefore work for longer than a 1.3Ah battery of the same voltage.

Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.

K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.

Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.

The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours

Tri-axial vibration values are used to calculate all Makita vibration figures.

Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.

The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours

Tri-axial vibration values are used to calculate all Makita vibration figures.

Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.

The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours

Tri-axial vibration values are used to calculate all Makita vibration figures.

Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.

The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours

Tri-axial vibration values are used to calculate all Makita vibration figures.

Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.