Makita’s range of steel cutting saw blades are designed to cut faster cleaner and quicker.
Especially formulated carbide, combined with a special tip design resists breakage on impact and lasts longer when cutting mild steel, sheet, pipe, channel, and threaded rod. Cutting quicker and cleaner Makita metal cutting blades will out last traditional abrasive discs up to 30 times.
Makita's range of PCD Circular Saw blades designed to cut fibre cement board including "Hardy board", "Marley Weatherboard" and compressed concrete. One of the fastest growing environmentally friendly materials in the construction industry. An ultimate blade when it comes to Fibre Cement, outstanding performance results compared to a TCT blade or Diamond Continuous blade.
Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing.
Easily copes with knotty wood and will normally slice through nail and screw embedded timber without damaging teeth. Especially suitable for reclaimed timber and demolition work.
A range of blades for portable, Mitre and table saws with excellent cutting performance in Aluminium, copper, brass, bronze and other non-ferrous metals.
The blades are also suitable for working on plastics and laminated wood.
• Precision plate tensioning for a flatter blade and truer cuts.
• Excellent cut quality in non-ferrous materials.
Apply blade wax to tip area frequently to prevent chip build up in blade gullets when cutting non-ferrous metals.
Blades Designed specifically for Plunge Type Saws.
Available for cutting both wood and aluminium, they are especially designed for a smooth clean cut. Plunge saw blades carry a similar specification to the Premium MakBlade Plus,
with a patented technology dampening vibration. The low vibration blades run truer with less wobble easily plunging into material with little effort.
Construction blades are designed to be hard working on site, strong enough to cut through constrction timber, formwork and chipboards. When speed is more important than making sure your timber is free from nails and concrete residue the construction blades are key.
A range of blades especially designed for cutting metal composite material or more commonly known as sandwich panel. Two thin skins of metal bonded to an insulating core. Especially designed to cut the metal skins leaving a clean non burr finish with very low heat generated to help preserve the bond between the two materials preventing deterioration.
Makita’s range of steel cutting saw blades are designed to cut faster cleaner and quicker. Especially formulated carbide, combined with a special tip design resists breakage on impact and lasts longer.